Post Processing
      Back to home
      1. Knowledge Base
      2. NextDent 5100/Figure 4 User Guides
      3. Post Processing

      Cleaning CrownTec Parts

      WEAR NITRILE GLOVES AND PROTECTIVE GOGGLES WHENEVER HANDLING UNCURED PARTS.
      1. Remove the parts from the print platform using a putty knife.
      2. Remove excess material by wiping the parts with a lint-free cloth (or small brush) soaked in 96% alcohol solution. Clean the parts until all uncured material is removed.
      3. Dry parts thoroughly with an air syringe.